2.PRINTING FROM WINDOWS
Setting Up Print Options 31
2 PRINTING FROM WINDOWS
[Center Double] can be used to create a booklet from a document that has been already created as a paginated
booklet. To create a paginated booklet from a normal document, perform the booklet printing in the 2-Sided Printing
option.
– The selectable options vary depending on the paper size.
– The "Staple" option is available only when the Finisher (optional) is installed.
– [Center Double] can be selected only when the Saddle Stitch Finisher (optional) is installed.
– The "Staple" option is not available when 2-Sided printing is selected together with the Magazine sort function.
– Stapling cannot be set when the following paper sizes are selected in the [Print Paper Size] box in the [Basic]
tab.
-A5
-A6
- 305 x 457 mm
-Statement
- 12 x 18"
-A4 Tab
- Letter Tab
- 320 x 450 mm
- 320 x 460 mm
- 13 x 19"
- Custom Paper Size
– Stapling cannot be set when the following paper types are selected at the [Paper Type] box in the [Basic] tab.
- Thick 4
- Special 1
- Special 2
- Transparency
- Thick 4 (Back)
- Special 1 (Back)
- Special 2 (Back)
For the detailed instructions on how to print with the [Staple] setting, see the following page:
& P.73 “Stapling”
To Next Page
Loading...
