Kyocera TASKalfa 650c - Accessing COMMAND CENTER Administrator Mode

4 EDITING FUNCTIONS
98 Image Shift
4
Select the type of binding margin.
5
Adjust the width of the binding margin.
1) Press [FRONT MARGIN] and adjust the binding margin width on the front side using [ 2 mm] and [ 100
mm].
2) Press [BACK MARGIN] and adjust the binding margin width on the back side using [ 2 mm] and [ 100 mm].
3) Press [OK].
Note that a right/left binding margin will be created on the opposite side on the back side of paper in duplex
copying. (For example, when a binding margin is created on the right of the front side of the paper, it will be
created on the left of the back side.)