4 EDITING FUNCTIONS
122 Sheet Insertion
Sheet Insertion
You can insert a special type of paper such as colored paper at the desired page. This function is called “sheet insertion”.
You can insert up to 2 types of sheets for a total of 50 pages. The sheet insertion mode has the following 2 types:
COPIED: Inserts a copied sheet, replacing the specified page.
BLANK: Inserts a blank sheet before the specified page.
1
Place sheets for sheet insertion.
Place them on the bypass tray or in a drawer previously set for insertion sheets.
y When placing paper in a drawer for sheet insertion, be sure to select “INSERT 1” or “INSERT 2” as a paper
type, and also set the paper size and thickness.
P.19 “Setting paper type”
y When placing paper on the bypass tray, be sure to set the paper size and thickness.
P.41 “Bypass Copying”
y The size and direction of the insertion sheets and the copy paper must be the same.
2
Place paper other than insertion sheets in the drawer(s).
3
Place the original(s).
When placing them on the original glass, they must be placed from the first page.
4
Press [SHEET INSERTION] on the EDIT menu.
To Next Page
Loading...
