3 BASIC COPY MODES
56 Paper Selection
Selecting desired paper manually
You need to select paper by yourself when copying the following originals whose sizes cannot be detected correctly:
y Highly transparent originals (e.g. OHP film, tracing paper)
y Totally dark originals or originals with dark borders
y Non-standard size originals (e.g. newspaper, magazines)
When paper of the size you want to use is not in any drawer, place it in a drawer or on the bypass tray.
P.13 “Placing copy paper in drawers”
P.41 “Bypass Copying”
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Place the original(s).
3
Press the drawer button corresponding to the desired paper size.
4
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
