Kyocera TASKalfa 650c

6 TEMPLATES
182 Deleting Groups or Templates
 Deleting templates
1
In the template menu, select the group to which the desired template is registered.
1) Press the [REGISTRATION] tab.
2) Press the button for the desired group.
3) Press [OPEN].
To switch the menu
y Press or .
y Key in the group number (3 digits).
2
Enter the password as follows and then press [OK].
When the public template group is selected: Press [PASSWORD] and then enter the Admin Password (6 to 10
digits) with the buttons on the touch panel or the digital keys on the control panel.
When a private group is selected: Key in a 5-digit password set for the selected group. If no password is set, go
to step 3.
When you enter the wrong Admin Password 3 times consecutively, this equipment will become locked up for 30
seconds. In this case, wait until it is unlocked and then enter the correct password.