4 EDITING FUNCTIONS
138 Image Repeat
Image Repeat
You can copy a certain area on an original repeatedly in the times that you specified. This function is called “image repeat”.
y You can repeat copying up to 8 times.
y Only standard size originals are available.
When registering this function into a template, be sure to select [DISABLE] of “AUTOMATIC START”. If [ENABLE] is
selected, copies may not be made correctly because the original size is not detected.
P.163 “TEMPLATES”
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Press [IMAGE REPEAT] on the EDIT menu.
3
Place the original on the original glass with its face
up.
Place it with its bottom toward you. Match its top left corner against that
of the original glass so that the original will be aligned with the original
scales.
To Next Page
Loading...
