1.BEFORE USING EQUIPMENT
Placing Copy Paper 17
1 BEFORE USING EQUIPMENT
Registering paper size
When you place paper for the first time or you replace the paper with that of a different size, you need to register the size
to this equipment.
2
Press the [USER] tab on the touch panel to display the user setting menu, and then
press [DRAWER].
When paper size is set to be detected automatically:
When [AUTO (mm)] or [AUTO (inch)] has been selected for the paper size, the following procedure is not required. The paper size is
set automatically.
1
Press the [USER FUNCTIONS] button on the control
panel.
To Next Page
Loading...
