3 BASIC COPY MODES
86 Duplex Copying
4
Select the desired mode.
[1->1 SIMPLEX]: 1-sided original to 1-sided copy
[2->1 SPLIT]: 2-sided original to 1-sided copy
5
Select other copy modes as required, and then press the [START] button on the control
panel.
Making 2-sided copy
If 1-sided portrait originals have been placed in a landscape direction and you copy them on both sides of the paper,
copied sheets are usually in the open to top/bottom direction. You can make copies in the open to left/right direction
with the image direction function.
P.131 “Image Direction”
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper size.
2
Place the original(s).
To Next Page
Loading...
