4.EDITING FUNCTIONS
2IN1 / 4IN1 109
4 EDITING FUNCTIONS
4
Perform 2IN1 / 4IN1 setting.
NUMBER OF PAGES PER SHEET: If you want to copy 2 originals on 1 page, select [2IN1]. If you want 4 on 1
page, select [4IN1].
2-SIDED: Select from [1->1 SIMPLEX], [1-> 2 DUPLEX], [2-> 2 DUPLEX] or [2->1 SPLIT].
Press [OK] after you have selected all the necessary items.
5
Select other copy modes as required, and then press the [START] button on the control
panel.
When the originals are placed on the RADF, scanning and copying start. When they are placed on the original
glass, follow steps 6 and 7.
6
Place the next original, and then press the [START] button.
Scanning of the next original starts. The scanning also starts when you press [YES] on the touch panel and then
the [START] button on the control panel. If you have more than one original, repeat this step until the scanning of all
the originals is finished.
7
When the scanning of all the originals is finished, press [FINISHED] on the touch panel.
Copying starts.
To Next Page
Loading...
