4.EDITING FUNCTIONS
Magazine Sort Mode 111
4 EDITING FUNCTIONS
4
Press [MAGAZINE SORT] on the EDIT menu.
5
Set the saddle stitch mode and the binding margin width as required.
1) When setting the saddle stitch mode, press [STAPLE ON]. If not, press [STAPLE OFF].
2) Press either [ 2 mm] (0.08") or [ 30 mm] (1.18") to adjust the binding margin width.
3) Press [OK].
For the maximum number of sheets available for saddle stitching, see the following page:
P.79 “Magazine sort / Saddle stitch”
6
Select other copy modes as required, and then press the [START] button on the control
panel.
To Next Page
Loading...
