1.BEFORE USING EQUIPMENT
Placing Copy Paper 15
1 BEFORE USING EQUIPMENT
10
Push the drawer straight into this equipment carefully until it comes to a stop.
Be careful not to let your fingers be caught when pushing the drawer into this equipment.
This could injure you.
The procedure differs as follows depending on the menu displayed after the drawer is closed.
When “Did you change paper type?” appears
11
When the paper type is different from the one that was in the drawer, press [YES] on the
touch panel. When it is the same, press [NO].
If you press [NO], the procedure is completed.
12
Select the paper type of the paper placed in the drawer on the touch panel.
1) Select the paper type ( P.19).
2) Press [OK].
To Next Page
Loading...
