Labconco Protector Echo 180 Series User Manual

Chapter 6: Maintaining the Protector Filtered Hood
Product Service 1-800-522-7658
101
Original instructions
Step 10 – Attach back panel to the controller
Before you slide the back panel over to cover up the controller check to make sure
the ethernet cable is still securely attached to the female port and that the air tube
inside is still connected in its spot on the back panel.
Once you are sure they are in place, slide the cover over the rest of the way and
insert the six screws.
Air Tube
Ethernet
Cable

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English