67
LABEL S.p.A.
Via Ilariuzzi, 17/A ‑ S. Pancrazio P.se ‑ 43126 ‑ PARMA ‑ Italy
Tel. (+39) 0521/6752 - Fax (+39) 0521/675222
www.labelspa.com
DECLARATION OF INCORPORATION OF PARTLY ASSEMBLED MACHINERY
Manufacturer: Label S.p.A.
Address: Via Ilariuzzi 17/A - 43126 San Pancrazio Parmense, PARMA - ITALY
Declares that: the automation, mod. ETERNA 150 (type 150S, 150D, 300TSX, 300TDX and 300T)
Serial Number:
realized to control pedestrian automatic sliding doors
is in conformity with the essential safety requirements of the following Directives:
•
Low voltage directive LVD 2014/35/EU
•
Electromagnetic compatibility directive EMC 2014/30/EU
Label declares that the automation ETERNA 150 has been realized to be incorporated in a machinery or to be assembled with other
devices to constitute a machinery covered by Machine Directive 2006/42/EC.
Harmonized European regulations applied:
EN 13849-1
EN 13849-2 (automation in category 2, PL = d)
EN 61000-6-2
EN 61000-6-3
EN 60335-1
EN 16005
Also declares that it is not allowed the commissioning of the product indicated until the final machinery in which the product is
incorporated is declared in conformity according to the Machinery Directive 2006/42/EC.
Label undertakes to submit, upon suitably justified request of the national authorities, information related to the partly completed
machinery.
PERSON AUTHORIZED TO ESTABLISH THE TECHNICAL DOCUMENTATION:
Bruno Baron Toaldo
Via Ilariuzzi, 17/A
43126 - San Pancrazio P.se - Parma
Parma, 03/05/2018
The Chairman
Bruno Baron Toaldo
To Next Page
Loading...
Need help?
General
