Label NEPTIS PLUS User Manual

47
•
Press the ON button to enable the usage of user passwords and return to the menu PASSWORD MANAGEMENT.
To return to the work program view, press the EXIT button twice.
•
From this moment on, whenever the user wants to access the digital selector ET-DSEL to change the automatic door work program,
the primary or service password must be entered.
When the user decides to enable password usage, it is recommended to change the combination of both primary
and service password.
21.5) DISABLING USER PASSWORD USAGE
•
From the PASSWORD MANAGEMENT section, select “PASSWORD ON / OFF”
•
Press the button OK (F1)
•
Enter the primary password
•
Press the OFF button (F1) to disable user password usage. To return to the general programming menu, press the EXIT button twice
Access to the digital selector ET-DSEL as program selector now is free.
21.4) ENABLING USER PASSWORD USAGE (PRIMARY AND SERVICE)
•
Select “PASSWORD ON / OFF”
•
Press OK (F1).
•
Enter the primary password

Label NEPTIS PLUS Specifications

General

Brand	Label
Model	NEPTIS PLUS
Category	Door Opening System
Language	English