Label NEPTIS PLUS - Page 68

68 pages

To Previous Page

NEPTIS-PLUS

Made in Italy

S.p.A

Via Ilariuzzi, 17/A - S. Pancrazio P.se - 43126 PARMA - ITALY

Tel. (+39) 05 21/ 67 52 - Fax (+39) 05 21/ 67 52 22

infocom@labelspa.it - www.labelspa.com

Main Page

Table of Contents2
General Safety Warnings4
General Safety Obligations4
Description of the Models5
Technical Specifications5
Neptis Plus Automation Components6
Preliminary Checks7
Technical Drawings8
Assembly of the Automation on the Transom from the Hinge Side8
Assembly of the Automation on the Transom from the Hinge Side9
Assembly of the Automation on the Transom from the Hinge Side10
Assembly of the Automation on the Transom from the Side Opposite to the Hinge11
Assembly of the Automation on the Leaf from the Hinge Side12
Assembly of the Automation on the Transom from the Hinge Side13
Movement Transmission Arms14
Slide Pull Arm Bdt214
Short Slide Pull Arm Bdt2R5515
Sliding Guide for Pull Arm15
Bss2 Articulated Push Arm15
Extb-Z Tapered Pin16
Extension for Extb-Z Tapered Pin16
Preparation and Installation of the Automation17
Tools Required17
Automation Check17
Automation Installation18
Choice of the Spring Load (for Neptis Plus Nb-Let, Nb-Letb, Nb-Slt, Nb-Sltb Automations Only)18
Insertion of the Arm Tapered Pin18
Spring Release (for Neptis Plus Nb-Let, Nb-Letb, Nb-Slt, Nb-Sltb Automations Only)18
Arm Removal19
Neptis Plus Automations with Battery (Sltb, Letb, Smtb Models)20
Spring Pre-Load Resetting Procedure (for Slt, Sltb, Let, Letb Models Only)21
Electronics22
Electric Arrangements22
Electric Connections23
Pwb Electrical Wiring and Power Supply Module24
Logic Card Lcb26
Digital Selector Et-Dsel - Purpose and Connections26
Safety Sensors27
Safety Sensor Oa-Edge T27
Flat Scan Safety Sensor27
Commissioning of the Automation (Initial Setup)28
First Start of the Digital Selector Et-Dsel28
Serial Communication Settings28
Initial Setup29
Functional Testing31
Input Diagnostics31
Program Selectors32
Manual Program Selectors32
Mechanical Key Selector Ev-Msel32
Digital Selector Et-Dsel - Used as Program Selector33
General Programming Menu35
Functions and Settings36
Functions Setting36
Potentiometer Adjustment36
Language44
Password Management44
How to Change the Technical Password45
How to Change the Primary Password45
How to Change the Service Password46
Enabling User Password Usage (Primary and Service)47
Disabling User Password Usage47
Selector Options48
Information and Event Memory49
Maintenance52
Plug and Play52
Applications with Electric Lock53
Electric Lock / Electric Strike53
Electromagnet53
Dual Leaf Door54
Dual Leaf Electric Setup54
Dual Leaf Door Commissioning54
Functional Testing57
Partial Opening57
Considerations about the Use of the Selector Et-Dsel of the Two-Leaf Door58
Master / Slave Inputs Diagnostics58
Rf1 Radio Receiver59
Courtesy Mode for Disabled60
Nb-Bat Battery Module61
Interlock System62
Electrical Connection for Interlock62
Operation of the Interlock System62
Interlock Application with a Single Internal Detector63
Interlock Application with Electric Locks Disabled with Closed Doors63
Privacy Function64
Electric Connections64
Operation of the Privacy System65
Settings65
Meaning of Buzzer Audible Signals66
Maintenance Program66
Declaration of Incorporation of Partly Assembled Machinery67

Label NEPTIS PLUS - Page 68

Table of Contents

Related product manuals