Labitec CoaDATA 501 - Utilities; Menu Printer

Operation
CoaDATA 501 – Operators Manual 2.1 Page 29
2.2.8 Utilities
To enter the Utilities Menu:
• finish an actual measurement
• change to the Standby-Mode
• press the left arrow-key
< UTILIT >
• Press Mode to confirm selection.
The following menus can be accessed under Utilities provided the secret
number (11111) has been entered: <printer>, <computer>, <beeper>,
<clock>, <calibrate-temp>, <secret no>, <cuvette test>.
Menu overview Settings
< printer >
AUTO- MANUAL- parameter protocol - OFF
< computer >
OFF - ON
< beeper >
ON - OFF - CLICK
< clock >
date and time
< calibrate temp >
adjustment of temperature
< secret no >
enter personal secret number
< cuvette test >
test automatic cuvette detection
Use the left or right arrow-key to change the menu selection.
Each alteration in one of the menus is to be confirmed with the Enter- key.
The following display appears:
<- select: ESC.
.. = work ENTER= more parameters
• Press Esc to access the measuring mode or press Enter to access
additional menu items.
2.2.8.1 Menu printer
< printer >
• Press Enter to confirm selection.
A selection between <AUTO>, <MANUAL>, <Par Pro>, and OFF for the
optional printer EPSON P40 can be made from this menu.
A print-out includes:
Test results, method parameters, complete parameter list, and error
messages.