Labitec CoaDATA 501 User Manual

Operators Manual
CoaDATA 501
For in-vitro diagnostic use only!

Labitec CoaDATA 501 Specifications

General

Brand	Labitec
Model	CoaDATA 501
Category	Measuring Instruments
Language	English

Summary

2 Operation

2.1 Steps for Instrument Operation

Outlines the general procedure for operating the analyzer, including startup and warm-up.

2.1.3 How to measure

Provides detailed steps for performing a measurement, including sample incubation and adjustment.

2.1.4 How to change methods

2.1.5 How to change methods with a ChipCARD

2.2 Method Parameterization

Guides users through configuring parameters for various analytical methods.

2.2.2 aPTT - parameterization

Specific parameter settings for the aPTT test method.

2.2.3 Fibrinogen 1 [g/l] - parameterization

Specific parameter settings for the Fibrinogen 1 [g/l] test method.

2.2.4 Fibrinogen 2 [mg/dl] - parameterization

Specific parameter settings for the Fibrinogen 2 [mg/dl] test method.

2.2.5 Thrombin time parameterization

Specific parameter settings for the Thrombin time test method.

2.2.6 Intrinsic Factor parameterization

Specific parameter settings for Intrinsic Factor tests.

2.2.7 Extrinsic Factor - parameterization

Specific parameter settings for Extrinsic Factor tests.

2.2.8 Utilities

2.3.1 Sample print-outs PT and calibration

2.4 Errors

2.4.1 Application errors

2.4.2 Error Messages

2.4.3 Errors during operation

3 Software

3.3 Method Parameters

4 Safety issues

4.1 Hazard and Precautions

Covers essential safety regulations, electrical safety, fire hazards, and mechanical risks.

4.2 Maintenance and Hygiene