Labitec CoaDATA 501 - Menu Computer; Menu Beeper; Menu Clock

Operation
CoaDATA 501 – Operators Manual 2.1 Page 30
If you select
- AUTO
The results will be printed out immediately after
they have been obtained.
- MANUAL
The results will be printed out after processing
results and pressing the Reset-key.
- OFF
The print function is switched off.
- Par Pro
All stored method parameters will be printed
out.
• Use the arrow keys to make a selection from the display.
• Press Enter to confirm a selection.
2.2.8.2 Menu computer
Change of the default parameters have only be done by the authorized
customer service of the distributor.
2.2.8.3 Menu beeper
< beeper >
• Press Enter to confirm selection.
The integrated beeper provides an acoustic signal
- during key strokes
- when an error occurs
- after sample incubation
- when clot recognition occurs
In this menu you can select between <ON>, <OFF>, and <CLICK>.
If you select:
- ON
The beeper will be activated. Each action will
be confirmed by the beeper.
- OFF
The beeper is deactivated.
- CLICK
Only key strokes will be confirmed.
• Use the arrow keys to make a selection in the display.
• Press Enter to confirm a selection.
2.2.8.4 Menu clock
< clock >
• Press Enter to confirm selection.
You can enter the current date and time with this menu. Once a selection
has been made the following dialog will appear:
18.05.99
Day, Month, Year