Software
CoaDATA 501 – Operators Manual 2.1 Page 40
3 Software
The software for the analyzer is stored in a memory and will be activated as
soon as the analyzer is switched on. It controls the analyzer via start
functions for the analytic program.
Visual communication between the analyzer and the user is accomplished
via a liquid crystal display with one row and 8 characters.
The menu Utilities has been integrated into the method menu so that
system settings can be performed for the following menus <printer>,
<computer>, <beeper>, <clock>, <calibrate temp>, <secret number>, and
<cuvette test>.
The analyzer contains automatic cuvette detection. The following display
will appear after initialization:
<-auto blanking .. keep channels clear.
At this point the optical blank value will be determined and stored for the
measuring channel. No cuvettes may be located in the measuring channels
at this time!
Due to the optical change in the measuring channel, the analyzer
automatically recognizes whether a cuvette is placed in the measuring
channel or removed.
Storing of parameter
After a parameterization of an instrument or test-data, short information
"write parameter" will be shown on the display.
To Next Page
Loading...