Operation
CoaDATA 501 – Operators Manual 2.1 Page 27
<- select: ESC. .. = work ENTER= more parameters
• Press Enter to add additional parameter or Esc to access the
measuring mode.
measurement
< measur >
• Press Enter to confirm the selection.
<- incubat.
= 60 s
• Enter the correct sample incubation time.
• Press Enter to confirm the selection.
A dialog will request the entry of start reagent volume and reagent lot no.:
<-Start Reagent
= 100 ul
• Enter the volume for start reagent.
lot. no. =
12345678
• Enter the reagent lot no.
• Press Enter to confirm the selection.
<- select: ESC.
.. = work ENTER= more parameters
• Press Esc to access the measuring mode or Enter to add or verify
additional parameters.
cuvette remove detection
< cuvdet >
• Press Enter-key to get the cuvette detection on the display.
< OFF >
By selecting:
- <ON> Cuvette detection occurs as soon as a cuvette is placed in the
measuring channel or removed from the measuring channel.
To Next Page
Loading...