Need help?Do you have a question about the LabJack U3 and is the answer not in the manual?
General| Analog Outputs | 2 |
|---|---|
| Analog Output Resolution | 10 bits |
| Digital I/O | 20 |
| Counter/Timers | 2 |
| Interface | USB |
| Operating Voltage | 5 V |
| Manufacturer | LabJack Corporation |
| Analog Inputs | 16 |
| Analog Input Resolution | 12-bit |
| Max Sample Rate | 50 kHz |
Configure and test the LabJack U3 device using the LJControlPanel application.
Program the latest firmware onto the LabJack U3 processor using the self-upgrade application.
Details the physical connections, ports, and status indicators of the LabJack U3.
Explains the analog input channels, voltage ranges, and conversion details.
Describes the analog output capabilities and voltage ranges of the DAC channels.
Covers the digital input/output channels, configurations, and connections.
Details the functionality and modes of the U3's timers and counters.
Explains the command/response method for device communication and execution times.
Describes high-speed data acquisition using stream mode and its performance.
Introduces the LabJackUD driver, its operation, and function flexibility.
Provides detailed descriptions of the high-level driver functions.
Practical pseudocode examples for common driver operations.
Details the low-level communication protocol for U3 commands.
Explains essential low-level commands for device configuration and data streaming.
Lists and explains error codes for low-level function calls.
To Next Page