LabJack U3 User Manual

5.2.6
Reads er
0x2A a (block numbers 0-7).
omm a which consists of 96 bytes
lock numbers 0-2). Do not call this function while streaming.
ReadMem (ReadCal)
1 block (32 bytes) from the non-volatile user or calibration memory. Command numb
ccesses the user memory area which consists of 256 bytes
and number 0x2D accesses the calibration memory are
C
(b
Command:
Byte
0 Checksum8
10xF8
20x01
3 0x2A (0x2D)
4 Checksum16 (LSB)
5 Checksum16 (MSB)
60x00
7BlockNum
ponse: Res
Byte
0 Checksum8
10xF8
20x11
3 0x2A (0x2D)
4 Checksum16 (LSB)
5 Checksum16 (MSB)
6 Errorcode
70x00
8-39 32 Bytes of Data
95

LabJack U3 Specifications

General

Analog Outputs	2
Analog Output Resolution	10 bits
Digital I/O	20
Counter/Timers	2
Interface	USB
Operating Voltage	5 V
Manufacturer	LabJack Corporation
Analog Inputs	16
Analog Input Resolution	12-bit
Max Sample Rate	50 kHz