LabJack U3 User Manual

5.2.11 StreamStart
U3 Once the stream settings are configured, this function is called to start the stream. Requires
hardware version 1.21.
Command:
Byte
00xA8
10xA8
Response:
Byte
0 Checksum8
10xA9
2 Errorcode
30x00
101

LabJack U3 Specifications

General

Analog Outputs	2
Analog Output Resolution	10 bits
Digital I/O	20
Counter/Timers	2
Interface	USB
Operating Voltage	5 V
Manufacturer	LabJack Corporation
Analog Inputs	16
Analog Input Resolution	12-bit
Max Sample Rate	50 kHz