PL1220 Owner’s Manual
11
1.6 Proposition 65 Warning of Harmful Exposure
Some dust created by power sanding, cutting, sawing, grinding, drilling, lasering, and other
construction activities contains chemicals known to the state of California to cause cancer, birth
defects, or other reproductive harm. Some examples of these chemicals are
• Lead from lead-based paint.
• Crystalline silica from bricks, cement, and other masonry products.
• Arsenic and chromium from chemically treated lumber.
The risk of exposure varies depending on frequency of use. To reduce exposure to these
chemicals, work in a well-ventilated area and work with approved safety equipment, such as face
or dust masks that are specifically designed to filter out microscopic particles.
DANGER
Fire Warning
Use extreme caution when cutting flammable materials such
as wood or acrylic. Keep the machine clean by following the
supplied maintenance schedule and always have a fire
extinguisher ready to extinguish a fire. Take extreme caution
when cutting acrylic materials as they are more volatile than
other materials.
Never leave the machine running unattended.
The tools sold by Laguna Tools are safe when used properly,
as described by the American National Safety Institute, the UL
Standards of safe tool use, and the IEC standards of safe tool
use. Laguna Tools is in no way responsible for injury or death
that occurs while using this product.
Personal safety is the responsibility of the operator.
To Next Page
