Laguna Tools PL1220 - Air Pump

PL1220 Owner’s Manual
43
7. Connect the power cord to the chiller machine only.
8. DO NOT connect to power until setup is complete.
6.6 Air Pump
DANGER
DO NOT plug in the PL1220 machine until setup and assembly
is complete.
WARNING
DO NOT connect to a power supply until setup is complete.
DO NOT perform any of the following steps, installations, or
adjustments with the machine connected to a power source
unless directed to do so.
NOTE
Reference the connection diagram in section 2.0 for
connections to the PL1220.