PL1220 Owner’s Manual
24
4.0 PL1220 Overview
The redesigned PL1220 laser from Laguna offers a complete ecosystem with optional rotary, fume
collector, stand & software. The 40-watt laser makes quick work of complicated inlay techniques, cuts
intricate designs out of wood, acrylic, and several other materials, along with perfect engraving
lithography in most non-metallic materials. The PL1220 has a full 12″ by 20″ workspace with a full 12″ Z-
axis to fit large materials and a rotary device. The bottomless design allows the user to engrave large
projects like tabletops and murals. The PL1220 keeps raising the bar!
4.1 Features
• PL12|20 Laser Machine: 12″ x 20″ work surface
• 40-Watt CO2 Laser
• Z-Axis Base: 12″ Capacity
• Industrial Water Chiller
• Air Pump
• Exhaust Fan
• Multiple Work Surfaces: Steel, Honeycomb, Bottomless
4.2 Components
The following depicts items shipped with the machine. Machine parts should arrive sealed in
plastic bags or packaging. Before assembling, verify that all the following parts are present:
• One (1) exhaust fan
• One (1) chilling unit
• One (1) air compressor
• One (1) steel bottom
• One (1) honeycomb bottom
• One (1) spare limit switch
• Three (3) power cables (Air Chiller, PL1220, Lift-bed)
• One (1) USB cable
• One (1) Ethernet Cable
• One (1) air hose with quick connect
• Two (2) connection cables
To Next Page
