PL1220 Owner’s Manual
13
WARNING
If this information is different than what is stated on the Motor
Specification Plate–omit this information.
It is possible that the documentation is outdated to a machine
change–such as a different motor.
Always check the motor plate prior to any wiring. If there are
any doubts, please consult a certified electrician.
Running on a different voltage than stated above will damage
the machine. NEVER run the machine in wet or damp
conditions.
NOTE
Reference the wiring diagram in section 15.0 for a detailed
look at the wiring diagram.
1.7.2 Grounding Methods
This machine must be grounded while in use to protect the
operator from electric shock.
To Next Page
