2 Safety Information
8
Shutdown /
bringing back into
service
The LT 2/KS1-DK lambda transmitter and KS1-DK combination probe constitute a
high-quality electronic measuring system. Prudent behaviour is therefore essential
during all measures, on shutdown, transport and storage.
CAUTION!
Do not switch off the LT 2/KS1-DK lambda transmitter while the KS1-DK
combination probe is still mounted, even if the associated system has been shut
down. Residual gases lead to corrosion and may damage system parts.
Do not store devices in the open air without protection! Always store in a dry place
and, if possible, in the original packaging.
Upon deinstallation, protect cable ends and connectors against corrosion and dirt.
Corroded connectors can lead to malfunctions.
Transport in the original packaging when possible
2.4 Environmentally responsible behaviour, disposal instructions
The LT 2/KS1-DK lambda transmitter has also been designed under consideration of
ecological aspects. The assemblies can easily be separated from each other into
different material types, and therefore put aside for recycling in this sorted condition.
To Next Page
Loading...
