Lamtec LT 2 - Analogue Inputs

4 Technical Description
48
4.14 Analogue inputs
Four analogue inputs via plug-in cards on the LT 2/KS1-DK basic electronics.
Freely configurable using the display and operating unit or remote display software,
parameter groups 570 to 609.
• From January 2007
Analogue input card for voltage -200...1000mV
for activating the CO/H2 sensor signal
Type 6 57 P 0660
• Analogue input card for current 0/4...20mA
Type 6 63 P 6001
• Analogue input card for current 0/4...20 mA
with 24 V DC supply for transducer for LT1 / LT 2
Type 6 63 P 6002
• Analogue input card for potentiometer 1...5 kΩ
Type 6 57 P 6000
• Temperature input for PT 100
Alternative measuring range 0...320 °C
0...850 °C
Type 6 57 R 0890