2 Safety Information
6
2.2 Permitted users
Qualified personnel
Staff responsible for safety must ensure that
• Only qualified persons undertake work on system parts. Qualified persons
have been authorised by staff who are responsible for the safety of people and
equipment to perform the above activities on the basis of their training,
experience or instruction pertaining to the device and their knowledge of
relevant standards, provisions, accident prevention regulations and system
behaviour. The deciding factor is that these persons can recognise and avoid
possible dangers in good time when performing the above activities.
Expert staff are persons who conform to DIN VDE 0105 or IEC 364, or directly
comparable standards such as DIN 0832.
• The above persons have the supplied manuals and associated order-related
documentation at their disposal at all times during their work and heed these
documents in respect of the avoidance of risk and damages.
User groups
The following three groups of users are permitted to handle the LT 2/KS 1D
lambda transmitter:
• A Service engineers from LAMTEC or their OEM customers, or trained
customer personnel:
• Qualified engineers / technicians
• With very good knowledge of the device.
• “SERVICE” access level - password-protected
• B Operators, the customer’s fitters, engineers for measuring and control
technology, electrical engineers, electronics engineers
• With introductory knowledge of the device.
• “CUSTOMER” access level – password-protected
• C Operating personnel with basic knowledge
• “OPERATION” access level – no password required
To Next Page
Loading...
