4 Technical Description
35
4.12 Optional extras
• Remote display software
• Measurement of flue gas and intake air temperature, and calculation of the
efficiency of combustion
• Calculation and display of the concentration of CO2, calculated for the specific fuel
on the basis of the measured O2 value and the max. CO2 value
• Load-dependent and fuel-specific limit values/limit curves
• Integrated PID/O2 controller
• (Outputs 1 and 2) max. potential difference 20 V configurable as desired
Direct current 0/4...20 mA, burden 0...600W
• Digital outputs in conjunction with relay module 657R0857
• Field bus connection
• Heating for wall mounting case
4.12.1 Remote display software
PC software for configuring the LT 2/KS1-DK as an alternative to the display and
operating unit, and for saving and restoring the data record.
• Remote display software incl. interface module RS 232 for PC
Type 6 57 R 1101
• Further licences for remote display software
Type 6 57 R 1102
For Windows PCs. Connection to the LT 2/KS1-DK via RS 232 interface.
See separate manual DLT1004.
To Next Page
Loading...
