7 Service and Maintenance
72
7.3 Maintenance
Due to the extensive self-diagnosis, the LT2/KS1-DK measurement system is largely
maintenance-free. Maintenance is restricted to calibration and, when necessary,
cleaning the preliminary filter from dust and other deposits, and the replacement of the
ZrO
2
measuring element at the given intervals.
7.3.1 Checking the measurement
Check the measurement monthly, quarterly or six-monthly, depending on the
application, see section 7.1
7.3.2 Wearing parts
KS1-DK combination probe
Average service life 3-5 years (depending on the fuel).
To Next Page
Loading...
