Lamtec VMS Series - Configuration Number

17
4 Settings
4.1.4 Configuration Number
The configuration number is a 15-digit number, constructed according to a fixed code.
K = Channel assignment f = Input voltage a, b, or d =
Feedback, correction
and firing rate
C:
Y = 1  Recirculation X = 1  230 VAC X = 1  Potentiometer
input 1k...5 k
0 = unoccupied
Y = 2  Fuel X = 2  115 VAC X = 2  continuous
signal 0/4...20mA
2 = continuous signal 0/
4...20mA
Y = 3  Air X = 3  24 ACV X = 3  TPS input 7 = mixed signal
4...20mA
Y = 4  Flue gas X = 5  Special voltage X = 4  Impilseingang
(Drehzahlmesser)
9 = O
2
actual value as
0/4...20mA
Y = 5  mech. fuel/air
ratio control
X = 5  PT 100-input
y = 6  Steam X = 6  Flame sensor
input (only on red.
feedback channel 4)
X = 8  continuous
signal with 24 V
supply for transducer
X = 0  unoccupied