Lauda ECO GOLD - Power-On and Basic Controls

44 / 134 ECO Gold 09/2021
7.1 Switching on
 1 s
- Switch on the device with the mains switch. An acoustic signal
sounds.
The current bath temperature (T
int
) is displayed with the status display above
it, the expanded status display at the top margin and the soft-key bar at the
bottom margin.
The pump starts (exception: "Standby" operating status).
When standby is activated ( 7.4.4), the last operating values are taken
over.
With the key T
max
you check or change the overtemperature switch-off
point:
 On pressing the key T
max
the value in the upper line is dis-
played.
(Setting the overtemperature switch-off point T
max
( 7.4.1)).