1. Press the Enter key to open the menu.
2.
Select the menu items Setup Basic setup Ethernet Services
LAUDA live LAUDA live [o/on].
The options [o] and [on] appear on the display.
3. Select the [on] option and press the Enter key to confirm.
The entry has been accepted.
After switching on, the constant temperature equipment is registered
and authenticated via an encrypted TLS connection using a device-spe-
cific X.509 certificate in LAUDA.LIVE. The connection can only be initi-
ated on the device side for security reasons. A successful connection to
LAUDA.LIVE is indicated in the same menu item under [Status]:
connected - currently connected to LAUDA.LIVE
connecting - connecting to LAUDA.LIVE
o - LAUDA.LIVE switched o
If a connection to LAUDA.LIVE already exists, a cloud appears in the status
bar of the home window.
Since LAUDA provides the user with full control over the data to be trans-
ferred, device data is not transferred until LAUDA.LIVE access has been
configured.
Allowing access to the LAUDA.LIVE cloud
Fig. 72: Services
Fig. 73: LAUDA.LIVE menu
Fig. 74: Status bar with cloud
V6Integral Process Thermostats and High-Temperature Thermostats122 / 198
To Next Page
Loading...
Need help?
General
