6300 Rev H User’s Manual
125-9106A Page 88
• If the wireless connection is lost, the tester will continue to perform the operation already in
progress. Switching to the Wired-Remote is seamless. However, any information displayed in the
lower section of the display screen will not be duplicated on the Wired-Remote when it becomes
fully functional. (For example, Leak-test results or Self-Test progress).
• If there is a large number of Wifi networks in the area (typically more than 10), it is possible that the
wireless communication will not be very effective due to limitations of Wifi bandwidth.
• When first connecting to the tester’s network, keep the iPad close to the tester.
• The Wifi signal may deteriorate significantly when the iPad is more than 100 feet away from the
tester.
To Previous Page
Loading...