LeCroy WaveRunner XI Series

OPERATOR’S MANUAL
WRXi-OM-E Rev C 117
Parameter Description Definition Notes
Local bsep
Local baseline separation,
between rising and falling
slopes.
sed to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Hysteresis argument u
Local max
Hysteresis argument used to
discriminate levels from noise
in data.
Maximum value of a local
feature.
Available with DDM2 option.
Standard in DDA-5005A.
Local min
Minimum value of a local
feature. oise
2 option.
Hysteresis argument used to
discriminate levels from n
in data.
Available with DDM
Standard in DDA-5005A.
Local number
airs).
to
oise
option.
Number of local features
(peak/trough p
Hysteresis argument used
discriminate levels from n
in data.
Available with DDM2
Standard in DDA-5005A.
Local pkpk
Vertical difference between the
peak and trough of a local
feature (lmax lmin).
.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option
Standard in DDA-5005A.
Local tbe
Time between events (between
local peak and next trough or
to
oise
.
local trough and next peak).
Hysteresis argument used
discriminate levels from n
in data.
Available with DDM2 option
Standard in DDA-5005A.
Local tbp
Time between a local feature
peak and the next local peak. oise
Hysteresis argument used to
discriminate levels from n
in data.
Available with DDM2 option.
Standard in DDA-5005A.
Local tbt
Time between a local feature to
n.
Standard in DDA-5005A.
trough and the next local
trough.
Hysteresis argument used
discriminate levels from noise
in data.
Available with DDM2 optio