LeCroy WaveRunner XI Series User Manual

WAVERUNNER XI SERIES
118 WRXi-OM-E Rev C
Parameter Description Definition Notes
Local tmax
Time of the maximum valu
a local feature.
e of
m noise
Available with DDM2 option.
Hysteresis argument used to
discriminate levels fro
in data.
Standard in DDA-5005A.
Local tmin
Time of the minimum value of a
local feature. ise
option.
Hysteresis argument used to
discriminate levels from no
in data.
Available with DDM2
Standard in DDA-5005A.
Local tot
Time a local feature spends
over a user specified
percentage of its peak-to-
troug
m noise
5A.
h amplitude.
Hysteresis argument used to
discriminate levels fro
in data.
Available with DDM2 option.
Standard in DDA-500
Local tpt
Time between local feature
05A.
peak and trough.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-50
Local ttp
n local feature
trough and the next local peak.
to
ls from noise
in data.
option.
Time betwee Hysteresis argument used
discriminate leve
Available with DDM2
Standard in DDA-5005A.
Local tut
Time a local feature spends
under a user specified
percentage of its peak-to-
trough amplitude.
2 option.
A.
Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM
Standard in DDA-5005
Mathcad
Produces a parameter using a
user-specified Mathcad
function.
Available with XMAP option.
Mathcad 2001i or later must
be loaded on the instrument.
MATLAB
Available with XMAP option.
MATLAB must be loaded on
the instrument.
Produces a parameter using a
user-specified MATLAB
function.

LeCroy WaveRunner XI Series Specifications

General

Brand	LeCroy
Model	WaveRunner XI Series
Category	Test Equipment
Language	English