MPC2810 Motion Controller Hardware Manual
IV
Safety Warnings
Please pay attention to following warnings to avoid any injury or machine
damage.
In this document, the following symbols are used to indicate the
level of damages. Ignoring the warnings might cause injuries.
The following symbols represent "MUST NOT" or "MUST"
operations which you have to observe.
Routine Safety Precautions
Please read through the routine safety precautions to avoid any injury or
property damage.
Use only quality power cables.
Make a connection or disconnection correctly and securely. The power
shouldn’t be turned on till the wire connection completes. The control
Indicates a potentially hazardous situation, if not
avoided, will result in death or serious injury.
Danger
Indicates a potentially hazardous situation, if not
avoided, will result in minor injury or property damage.
Represents "MUST NOT" operation, which is
inhibited.
Represents "MUST" operation, which has to be
executed.
Caution
To Next Page
Loading...
Need help?
General
