LEGRAND LC7001 - Supported Commands

Whole House Lighting Controller - LC7001 1308243 REV. F
14
Supported Commands
Alexa supports both switching and dimming commands. Switching commands simply turn
devices on and off. Dimming commands allow various levels of control to be applied to the
devices.
NOTE: Dimming commands only activate dimmable devices. While all dimmable and non-
dimmable devices in the same group respond to switching commands, only the dimmable
devices can respond to dimming commands.
Use the following supported control commands to change the light level for your controlled devices.
To turn a light ON/OFF
Alexa, turn <on/off> < light/room name >
Dim a light
(Results in an adjustment level of 45% for dimmable devices)
Alexa, dim the < light/room name >
Brighten a light
(Results in an adjustment level of 45% for dimmable devices)
Alexa, brighten the < light/room name >
Set a light brightness to a certain percentage
Alexa, set < light/room name > to <1-100%>
Dim/Brighten lights to a certain percentage
Alexa, dim/brighten < light/room name > to <1-100%>
Turn ON/OFF all the lights
Alexa, turn < on/off > everything