LEGRAND LC7001 User Manual

Whole House Lighting Controller - LC7001 1308243 REV. F
20
Using the Legrand Lighting Control App
After system discovery is complete, a dashboard
screen appears. The dashboard provides access to
various functions within the app.
• Turn All Lights ON or OFF
• View Recent and Upcoming Scenes
• Go to the Lights Page
• Go to the Scenes Page
• Go to Settings
Turn All Lights ON or OFF
Tap Turn All Lights On to collectively turn all of your lighting devices ON at the same time
when they are OFF. The button reads Turn All Lights Off to turn your lighting devices OFF
when they are ON.
• Press and hold Turn All Lights On to gradually increase the brightness of all of your
lighting devices to full brightness.
• With the lighting devices ON, swipe left and right to increase and lower the brightness of all
of your devices at once.
View Recent and Upcoming Scenes
• Recent Scenes : Select to view recent scenes triggered on the system.
• Upcoming Scenes : Select to view upcoming scenes set to occur within two days.
Go to the Lights Page
Select at the bottom of the dashboard screen.
The Lights page appears, displaying the names of all
controllable lighting devices within the system. This screen
shows the following options:
• : status of each lighting device (blue indicates ON).
• : current brightness level.
NOTE: If integrating with the QMotion Advanced Shading
System, refer to “Display Changes” on page 34.

LEGRAND LC7001 Specifications

General

Brand	LEGRAND
Model	LC7001
Category	Controller
Language	English