46 680 Series Video Distribution Amplifiers Installation and Operation Manual
Appendix A: Safety Precautions, Certifications, and Compliances
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Product Damage Precautions
Do Not Operate Without Covers
To avoid electrical shock or fire hazard, do not operate this product with
covers or panels removed.
Use Proper Fuse
To avoid fire hazard, use only the fuse type and rating specified for this
product.
Do Not Operate in Wet/Damp Conditions
To avoid injury or fire hazard, do not operate this product in wet or damp
conditions.
Do Not Operate in an Explosive Atmosphere
To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.
Avoid Exposed Circuitry
To avoid injury, remove jewelry such as rings, watches, and other metallic
objects. Do not touch exposed connections and components when power is
present.
CAUTION:
Disconnect power from the frame before removing or installing input/
output modules. Removing or installing modules with power applied could
cause serious damage to system components.
Use Proper Power Source
Do not operate this product from a power source that supplies more than the
specified voltage.
Use Proper Voltage Settings
Before applying power, ensure that the line selector is in the proper position
for the power source being used.
Provide Proper Ventilation
To prevent product overheating, provide proper ventilation.
Do Not Operate With Suspected Failures
If you suspect there is damage to this product, have it inspected by qualified
service personnel.
CAUTION: This unit can have more than one power supply cord. To
de-energize the internal circuitry, you have to disconnect all power cords.
ADVARSEL: Utstyret kan ha mere ennn en tilførselsledning. For å gjore
interne deler spennigsløse må alle tilførselsledningene trekkes ut.
VARNING: Denna apparat har mer än en nätanslutning. Samtliga nätkablar
måste bortkopplas för att göra de interna kretsarna spänningsfria.
To Next Page
Loading...
