Lenovo ThinkServer RD330 - Installing or Replacing a Heat Sink

Toreplaceahot-swapredundantpowersupply,dothefollowing:
1.Locatethefailinghot-swapredundantpowersupplyintherearofyourserver.Then,disconnectthe
powercordfromthefailinghot-swapredundantpowersupply.
2.Pressthetab1inthedirectionasshownandcarefullypullthehandle2atthesametimetoslidethe
failinghot-swapredundantpowersupplyoutofthechassis.
Note:Donotusetoomuchforce.Youcanrstcarefullyslidethehot-swapredundantpowersupplya
littlebitouttoreleaseitfromthesecuredposition.Then,completelyslideitoutofthechassis.
ID
Figure59.Removingahot-swapredundantpowersupply
3.Installanewhot-swapredundantpowersupplytothebay.See“Installingahot-swapredundant
powersupply”onpage107.
4.Ifyouareinstructedtoreturntheoldhot-swapredundantpowersupply,followallpackaginginstructions
anduseanypackagingmaterialsthataresuppliedtoyouforshipping.
Installingorreplacingaheatsink
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage67.
Thistopicprovidesinstructionsonhowtoinstallorreplaceaheatsink.
110ThinkServerRD330HardwareMaintenanceManual