Lenovo ThinkServer RD330 - Replacing a System Fan

8.PositionthenewIDMonthechassissothatthescrewholesinthenewIDMarealignedwiththe
correspondingmountingstudsonthechassis.Then,installthescrewstosecurethenewIDMinplace.
ID
Mem
CPU
PSU
Figure90.InstallingtheIDM
9.ConnecttheIDMcabletotherearofthenewIDM.
10.IfyouareinstructedtoreturntheoldIDM,followallpackaginginstructionsanduseanypackaging
materialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage153
.
Replacingasystemfan
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiii
and“Guidelines”onpage67.
Thistopicprovidesinstructionsonhowtoreplaceasystemfan.
CAUTION:
Hazardousmovingparts.Keepngersandotherbodypartsaway.
Chapter6.Installing,removing,orreplacinghardware139