Lenovo ThinkServer RD330 - Installing or Replacing the Optical Drive

5.Slidethenewhot-swapharddiskdriveintothedrivebayfromthefrontuntilitsnapsintoposition,
andthencompletelyclosethehandle.
ID
Mem
CPU
PSU
Figure76.Installingthehot-swapharddiskdrive
6.Checkthehot-swapharddiskdrivestatusLEDstoensurethattheharddiskdriveisoperatingcorrectly.
Youmighthavetorestarttheserverforthenewlyinstalledharddiskdrivetoberecognized.See
“Hot-swapharddiskdrivestatusLEDs”onpage26.Iftheharddiskdriveisfaulty,youneedtoreinstall
orreplaceituntilitisoperatingcorrectly.
7.Dooneofthefollowing:
•Ifyouareinstallingahot-swapharddiskdrive,savetheremoveddummyharddiskdrivetrayin
theeventthatyoulaterremovethehot-swapharddiskdriveandneedadummytraytocoverthe
drivebay.
•Ifyouarereplacingafailinghot-swapharddiskdriveandareinstructedtoreturnthefailinghot-swap
harddiskdrive,followallpackaginginstructionsanduseanypackagingmaterialsthataresuppliedto
youforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•TocongureRAID,goto“ConguringRAID”onpage56.
Installingorreplacingtheopticaldrive
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage67.
Thistopicprovidesinstructionsonhowtoinstallorreplacetheopticaldrive.
126ThinkServerRD330HardwareMaintenanceManual