Lenovo ThinkServer RD330 - Completing the Parts Replacement; Reinstalling the Server Cover and Reconnecting Cables

22.Notetheorientationofthetwosystemfancagesandcarefullyplacethemintothechassis.Then,press
thetwosystemfancagesstraightdownuntiltheyaresecurelyseatedinthechassis.Connectthe
systemfancablestothesystemboard.
Figure106.Installingthetwosystemfancageswithsystemfans
23.Installanyotherpartsthatyouhaveremovedandconnectallcablestothenewsystemboard.Referto
theinformationthatyouhavenoteddownandtherelatedtopicsin“Installing,removing,orreplacing
hardware”onpage71
.
24.Ifyouareinstructedtoreturntheoldsystemboard,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage153.
Completingthepartsreplacement
Thistopicprovidesinstructionstohelpyoucompletethepartsreplacementandturnonyourserver.
Tocompletethepartsreplacement,youmustproperlyroutethecablesinsidetheserver,reinstallthecooling
shroud(ifnecessary),reinstalltheservercover,reconnectalltheexternalcablesand,forsomedevices,
updatethermwareandruntheSetupUtilityprogramtodofurthersetup.
Reinstallingtheservercoverandreconnectingcables
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage67.
Thistopicprovidesinstructionsonhowtoreinstalltheservercoverandreconnectcablestoyourserver.
Attention:Forpropercoolingandairow,reinstalltheservercoverbeforeturningontheserver.Operating
theserverforextendedperiodsoftime(morethan30minutes)withtheservercoverremovedmight
damageservercomponents.
Beforeyoubegin,printalltherelatedinstructionsorensurethatyoucanviewthePDFversiononanother
computerforreference.
Chapter6.Installing,removing,orreplacinghardware153