Lenovo ThinkServer RD330 - System Board Components

1.Useonemini-SAStomini-SASsignalcable.Connectthemini-SASconnector1ononeendofthe
cabletotheport0ontheRAIDcard.Then,connectthemini-SASconnector2ontheotherendof
thecabletothemini-SASports0-3onthebackplane.
2.Ifyourserverhasmorethanfourharddiskdrivesinstalled,usetheothermini-SAStomini-SAS
signalcable.Connectthemini-SASconnector3ononeendofthecabletotheport1ontheRAID
card.Then,connectthemini-SASconnector
4ontheotherendofthecabletothemini-SASports
4-5onthebackplane.
Refertothefollowingtopicsforinformationabouttheconnectorlocations:
•“Hot-swapharddiskdrivebackplane”onpage28
•“RAIDcard”onpage26
•“Systemboardcomponents”onpage32
Systemboardcomponents
Thefollowingillustrationshowsthecomponentlocationsonthesystemboard.
Figure22.Systemboardcomponents
1Frontpanelconnector17Risercardassembly1slot
2InternalUSBconnector1
18Risercardassembly2slot
3InternalUSBconnector2
19Redundantpowersupplyconnector1
4IntelligentDiagnosticsModuleconnector20Redundantpowersupplyconnector2
32ThinkServerRD330HardwareMaintenanceManual