Lenovo ThinkServer RD330 - Replacing the System Board Battery

9.Positionthenewrisercardassembly1onthechassisandalignitwiththerisercardassembly1sloton
thesystemboardandaligntherearofitwiththecorrespondingrailguidesintherearofthechassis.
Then,pressthenewrisercardassembly1straightdownuntilitissecurelyseatedintheslot.
Note:IfthereisanyPCIExpresscard(suchasanEthernetcard)installedontherisercardassembly1,
installthePCIExpresscardtothenewrisercardassembly1rst.See“InstallingtheEthernetcard”on
page81
.Then,refertoyournotetoreconnectanycablestothePCIExpresscardonthenewriser
cardassembly1andproperlyrouteallthecables.
Figure96.Installingtherisercardassembly1
10.Ifyouareinstructedtoreturntheoldrisercardassembly,followallpackaginginstructionsanduseany
packagingmaterialsthataresuppliedtoyouforshipping.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletethereplacement,goto“Completingthepartsreplacement”onpage153.
Replacingthesystemboardbattery
Attention:Donotopenyourserverorattemptanyrepairbeforereadingandunderstanding“Safetyinformation”
onpageiiiand“Guidelines”onpage67.
Thistopicprovidesinstructionsonhowtoreplacethesystemboardbattery.
Chapter6.Installing,removing,orreplacinghardware145