Lenovo ThinkServer RD330 - Page 168

Note:Dependingonthemodel,yourservermightlookslightlydifferentfromtheillustrationsinthistopic.
Toreinstalltheservercoverandreconnectcablestoyourserver,dothefollowing:
1.Ensurethatallcomponentshavebeenreassembledcorrectlyandthatnotoolsorloosescrewsare
leftinsideyourserver.
2.Ensurethatallinternalcablesareroutedcorrectlyandsecuredbyanycableclipsortiesintheserver.
Keepcablesclearofthehingesandsidesoftheserverchassistoavoidinterferencewithreinstalling
thecoolingshroudandtheservercover.Thefollowingillustrationsshowthecableroutingforthetwo
chassiscongurationsbasedonthesupportedharddiskdrives.
•Routethesignalcables
1throughtheleftinnersideofthechassis.Thesignalcablesincludethe
mini-SAStomini-SASsignalcable,thefrontpanelcable,thefrontpanelUSBcable,thediagnostic
modulecable,andtheSATAsignalcablefortheopticaldrive.
•Connectthepowercable2fortheopticaldrivetotheopticaldrivepowerconnectoronthe
backplaneandproperlyroutethecableinthechassis.
•Routethebackplanepowercable3throughtherightinnersideofthechassis.
Figure107.Cableroutingforservermodelswith3.5-inchharddiskdrives
154ThinkServerRD330HardwareMaintenanceManual