15.Gentlylifteachedgeofthesystemboardalittlebitupwardtocompletelyreleasethesystemboard
fromthemountingstudsonthechassis.Slowlymovethesystemboardtothefrontofthechassis,and
thenpivotthesystemboardupwardtoremoveitoutofthechassis.
Note:Carefullyhandlethesystemboardbyitsedges.
Figure101.Removingthesystemboard
16.Placetheoldsystemboardonaclean,at,andstatic-protectivesurface.Touchthestatic-protective
packagethatcontainsthenewsystemboardtoanyunpaintedsurfaceontheoutsideoftheserver.
Then,removethenewsystemboardfromthepackage.
17.Notetheorientationofthenewsystemboardandcarefullyplaceitintothechassissothattherear
connectorsareinsertedintothecorrespondingholesintherearpanel.